Sterling® ZeroFire Optima 600 is a one component, solvent borne, very low VOC, high solids intumescent coating specially formulated and design for fire protection of structural steel exposed to cellulosic fire. Can be...
TechnoBit® Durothane CT is a two-component polyurethane protective and waterproof coating system modified with premium quality extended coal tar which cures by reaction with atmospheric moisture and forms a seamless h...
TechnoCoat® CRC is a multi-component high performance coating based on high chemical resistant solvent-free epoxy resin technology which is designed to provide a tough and durable floor protection finish in a variety ...
TechnoCoat®CarboElastic1K (WB) is a single component, low VOC, water-based, high build elastomeric, modified styrene acrylic copolymer decorative concrete coating for long term protection of concrete & masonry from ag...
TechnoCoat ClearSeal-PU is a two-pack chemical and UV resistant aliphatic transparent protective and waterproof polyurethane top coat.
TechnoCoat® Coropox-2C is a two-component solvent free high build coal tar epoxy resin coating that can applied as a single Or two-coat system.
TechnoCoat Fire Optima 180 is an intumescent fire protection coating for structural steel.
TechnoCoat® Novolac HS is a solvent free, durable, High performance, excellent wear and chemical resistance epoxy resin Novolac coating system designed for use as a chemical resistant Lining, Coating and hard wearing ...
TechnoCoat® PU-TC is a two component, solvent free, thixotropic, pigmented aliphatic polyurethane based waterproofing membrane interior and exterior top coat for concrete and metal surfaces possessing good resistance ...
TechnoCoat® RR100 is a single component sulphate and chloride free liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat. TechnoCoat® RR100 performs rust removal and...
TechnoCoat® RR100 is a single component sulphate and chloride free liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat. TechnoCoat® RR100 performs rust removal and...
TechnoCoat® UCR is a two-component, High solids, heat and chemical resistant epoxy. This highly versatile epoxy coating comes in clear and pigmented.
TechnoCoat® ZR Special is a formulated two component Zinc Rich Anticorrosive epoxy primer for ferrous metal surfaces to provide far better performance over other primers by cathodic protection to the base metal.
TechnoCoat® CarboElastic1K (M) is a single component, high build, decorative protective and Anticarbonation coating based on an advance acrylic micro polymer resin binder that cross-links to give excellent adhesion to...
TechnoCoat® CarboElastic1K (S) is a single component, solvent-based aliphatic acrylate coating for external and internal use over a variety of concrete and masonry substrates.
TechnoFlex® RC 930 is Plasticizer and formaldehyde free*, styrene acrylic copolymer emulsion for the formulation of elastic coatings for building facades and elastic waterproofing roof coatings.
TechnoFlex® WPU 1K is a single-component highly elastomeric white coloured non-flammable aliphatic polyurethane modified waterproof coating comprising of modified polyurethane & specially developed and designed hollow...
TechnoPur® Aqua Prime is a two-component, clear, waterbased polyurethane primer build coat, suitable for brush or roller application specifically designed to enhance the adhesion of Polyurethane membranes, used in wat...
TechnoPur® Eco Cleaner is highly effective in Flushing and Immersion cleaning of spray equipment, mixing and metering equipment and feed lines, as well as loosening and removing uncured urethane foam deposits and buil...
TechnoPur® Gelflex LV 2 in 1 is a two-component, low viscous, dual combination solvent and phthalate-free, polyurethane injection resin grout system to stop water leakage along with permanent & elastic sealing of crac...
TechnoPur® Grout Gelflex 2K is a solvent and phthalate-free two-component MDI-based hydrophilic polyurethane injection system designed with a mixing ratio of 1:1 by volume with extended gel time forming an elastomeric...
TechnoPur®InjectoSeal 1K-M is a closed cell, high performance hydrophobic polyurethane injection grout designed to initiate expansion in the product to seal leaking cracks and joints in concrete structure and fill voi...
TechnoPur®InjectoSeal 2K is an ultra-rapid reacting, expansive hydrophobic polyurethane injection grout specially designed to stop active water leaks and fill voids in concrete, gravel layers and rock fissures.
TechnoPur® InsulPuf is a two component,1:1 ratio, HCFC-blown & CFC free, polymeric M.D.I based system for producing rigid urethane foam which when processed through suitable spray machinery will produce a rigid foam w...
TechnoSeal® FlexiPrime SB is a penetrating hydrophobic silane/siloxane based primer. It is used as a primer for Techno Builders Solutions® range of acrylic based protective coating.
TechnoSeal® Bitucold SB is a quick drying solvent based high build low viscosity bitumen primer.
TechnoSeal®EPW is a water dispersible high build epoxy coating system suitable for all applications where concrete or masonry requires protection, primer and finished coats for internal concrete floors and walls where...
TechnoSeal® FlexiPrime WB is a water-based primer based on acrylic resins with high resistance to alkaline environment and it is used for preparing absorbent substrates. It has excellent penetrating ability creating t...
TechnoSeal® PS Prime is a two-component, solvent-borne, polyamide-cured liquid primer containing special adhesion promoting agents that prepares non-porous surfaces and surfaces that will be subsequently submerged for...
TechnoSeal® PU -2K is a two component Polyurethane based, tough flexible durable with strong adhesive sealant specifically designed to be used as a watertight seal for moderate movement and control joints in concrete ...
TechnoSeal® PU 300 is a white/grey, fast curing one component moisture-curing polyurethane adhesive sealant which forms a durable, flexible and elastomeric seam on curing.
TechnoSeal® PrimePlus is a moisture curing, single pack, liquid polyurethane penetrating sealer primer.
TechnoSeal UVR-TC is a UV-resistant protective top coat with semi-gloss finish designed for steel and concrete surfaces. It provides excellent weather resistance and long-term durability for exterior applications.
Sterling® ZeroFire Pro 550 is one component, solvent-borne, intumescent coating, specially formulated and design for fire protection of structural steel exposed to cellulosic fire. Can be used as a mid-coat or finish ...