support@sterlingtechnotrade.com sales@sterlingtechnotrade.com +91 9643313590
Generic filters
Search in title
Exact matches only

TechnoSeal® UVR-TC is a two component, solvent free, thixotropic, pigmented aliphatic polyurethane based waterproofing membrane interior and exterior top coat for concrete and metal surfaces possessing good resistance to long term exposure of UV rays and chemical attack and provides an easily cleaned coating.TechnoSeal® UVR-TC remains unaffected by rain water, soap water, dilute acids, alkalis and various other chemical solutions.

TechnoCoat® CarboElastic1K (S) is a single component, solvent-based aliphatic acrylate coating for external and internal use over a variety of concrete and masonry substrates. It penetrates into the porous concrete substrate, producing an exterior masonry impermeable coating that also prevents chloride ion ingress and exceeds all the requirements of a coating that resists carbonation.

TechnoCoat® CarboElastic1K (M) is a single component, high build, decorative protective and Anticarbonation coating based on an advance acrylic micro polymer resin binder that cross-links to give excellent adhesion to most building substrates. The cured membrane is elastomeric, enabling it to facilitate movement in the substrate and to bridge hairline cracks, giving outstanding durability over a long service life. TechnoCoat® CarboElastic1K (M) coating is suitable for use on exterior and interior surfaces of concrete and anti-rust primed steel.

TechnoCoat® ZR Special is a formulated two component Zinc Rich Anticorrosive epoxy primer for ferrous metal surfaces to provide far better performance over other primers by cathodic protection to the base metal. TechnoCoat® ZR Special is recommended both for new steel and also for old & corroded steel in concrete repair & rehabilitation applications.TechnoCoat® ZR Special is compatible and can be over coated with a wide range of high performance corrosion resistant finish coatings based on epoxy, chlorinated rubber, polyurethanes etc.,

TechnoCoat® UCR is a two-component, High solids, heat and chemical resistant epoxy. This highly versatile epoxy coating comes in clear and pigmented. TechnoCoat® UCR consists of pre-weighed base & hardener components, both of them contain reactive elements that are essential to the installation of the system. TechnoCoat® UCR is suitable for use on concrete and steel surfaces. The material may be used with or without antislip aggregates and can also can be laminated with glass fibre cloth to achieve a high build, chemical resistant lining.

TechnoCoat® RR500 is a single component sulphate and chloride free liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat. TechnoCoat® RR500 performs rust removal and rust prevention in one operation in mild conditions.

TechnoCoat® RR100 is a single component sulphate and chloride free liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat. TechnoCoat® RR100 performs rust removal and rust prevention in one operation in mild conditions.

TechnoCoat® PU-TC is a two component, solvent free, thixotropic, pigmented aliphatic polyurethane based waterproofing membrane possessing good resistance to long term exposure of UV rays and chemical attack and provides an easily cleaned coating.TechnoCoat® PU-TC remains unaffected by rain water, soap water, dilute acids, alkalis and various other chemical solutions.

TechnoCoat® Novolac HS is a solvent free, durable, High performance, excellent wear and chemical resistance epoxy resin Novolac coating system designed for use as a chemical resistant Lining, Coating and hard wearing coloured flooring system for areas such as factories, warehouses, Chemicals unit etc.TechnoCoat® Novolac HS consists of preweighed base & hardener components and a TechnoFloor® colour pack, all of which contain reactive elements that are essential to the installation of the system. TechnoCoat® Novolac HS is suitable for use on concrete and steel surfaces. The material may be used with or without antislip aggregates and can also can be laminated with glass fibre cloth to achieve a high build, chemical resistant lining.

TechnoCoat® Fire Optima 180 is a single component indigenous coating for protection of substrates from Fire, flame and continuous torching. TechnoCoat® Fire Optima 180 does not ignite, does not catch fire and hence does not emit any toxic gases. There by reducing and restricting the substrates and base materials from fire there by eliminating and reducing damages and causalities.

TechnoSeal® UVR-TC is a two component, solvent free, thixotropic, pigmented aliphatic polyurethane based waterproofing membrane interior and exterior top coat for concrete and metal surfaces possessing good resistance to long term exposure of UV rays and chemical attack and provides an easily cleaned coating.TechnoSeal® UVR-TC remains unaffected by rain water, soap water, dilute acids, alkalis and various other chemical solutions.

TechnoCoat® CarboElastic1K (S) is a single component, solvent-based aliphatic acrylate coating for external and internal use over a variety of concrete and masonry substrates. It penetrates into the porous concrete substrate, producing an exterior masonry impermeable coating that also prevents chloride ion ingress and exceeds all the requirements of a coating that resists carbonation.

TechnoCoat® CarboElastic1K (M) is a single component, high build, decorative protective and Anticarbonation coating based on an advance acrylic micro polymer resin binder that cross-links to give excellent adhesion to most building substrates. The cured membrane is elastomeric, enabling it to facilitate movement in the substrate and to bridge hairline cracks, giving outstanding durability over a long service life. TechnoCoat® CarboElastic1K (M) coating is suitable for use on exterior and interior surfaces of concrete and anti-rust primed steel.

TechnoCoat® ZR Special is a formulated two component Zinc Rich Anticorrosive epoxy primer for ferrous metal surfaces to provide far better performance over other primers by cathodic protection to the base metal. TechnoCoat® ZR Special is recommended both for new steel and also for old & corroded steel in concrete repair & rehabilitation applications.TechnoCoat® ZR Special is compatible and can be over coated with a wide range of high performance corrosion resistant finish coatings based on epoxy, chlorinated rubber, polyurethanes etc.,

TechnoCoat® UCR is a two-component, High solids, heat and chemical resistant epoxy. This highly versatile epoxy coating comes in clear and pigmented. TechnoCoat® UCR consists of pre-weighed base & hardener components, both of them contain reactive elements that are essential to the installation of the system. TechnoCoat® UCR is suitable for use on concrete and steel surfaces. The material may be used with or without antislip aggregates and can also can be laminated with glass fibre cloth to achieve a high build, chemical resistant lining.

TechnoCoat® RR500 is a single component sulphate and chloride free liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat. TechnoCoat® RR500 performs rust removal and rust prevention in one operation in mild conditions.

TechnoCoat® RR100 is a single component sulphate and chloride free liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat. TechnoCoat® RR100 performs rust removal and rust prevention in one operation in mild conditions.

TechnoCoat® PU-TC is a two component, solvent free, thixotropic, pigmented aliphatic polyurethane based waterproofing membrane possessing good resistance to long term exposure of UV rays and chemical attack and provides an easily cleaned coating.TechnoCoat® PU-TC remains unaffected by rain water, soap water, dilute acids, alkalis and various other chemical solutions.

TechnoCoat® Novolac HS is a solvent free, durable, High performance, excellent wear and chemical resistance epoxy resin Novolac coating system designed for use as a chemical resistant Lining, Coating and hard wearing coloured flooring system for areas such as factories, warehouses, Chemicals unit etc.TechnoCoat® Novolac HS consists of preweighed base & hardener components and a TechnoFloor® colour pack, all of which contain reactive elements that are essential to the installation of the system. TechnoCoat® Novolac HS is suitable for use on concrete and steel surfaces. The material may be used with or without antislip aggregates and can also can be laminated with glass fibre cloth to achieve a high build, chemical resistant lining.

TechnoCoat® Fire Optima 180 is a single component indigenous coating for protection of substrates from Fire, flame and continuous torching. TechnoCoat® Fire Optima 180 does not ignite, does not catch fire and hence does not emit any toxic gases. There by reducing and restricting the substrates and base materials from fire there by eliminating and reducing damages and causalities.

TechnoSeal® UVR-TC is a two component, solvent free, thixotropic, pigmented aliphatic polyurethane based waterproofing membrane interior and exterior top coat for concrete and metal surfaces possessing good resistance to long term exposure of UV rays and chemical attack and provides an easily cleaned coating.TechnoSeal® UVR-TC remains unaffected by rain water, soap water, dilute acids, alkalis and various other chemical solutions.

TechnoCoat® CarboElastic1K (S) is a single component, solvent-based aliphatic acrylate coating for external and internal use over a variety of concrete and masonry substrates. It penetrates into the porous concrete substrate, producing an exterior masonry impermeable coating that also prevents chloride ion ingress and exceeds all the requirements of a coating that resists carbonation.

TechnoCoat® CarboElastic1K (M) is a single component, high build, decorative protective and Anticarbonation coating based on an advance acrylic micro polymer resin binder that cross-links to give excellent adhesion to most building substrates. The cured membrane is elastomeric, enabling it to facilitate movement in the substrate and to bridge hairline cracks, giving outstanding durability over a long service life. TechnoCoat® CarboElastic1K (M) coating is suitable for use on exterior and interior surfaces of concrete and anti-rust primed steel.

TechnoCoat® ZR Special is a formulated two component Zinc Rich Anticorrosive epoxy primer for ferrous metal surfaces to provide far better performance over other primers by cathodic protection to the base metal. TechnoCoat® ZR Special is recommended both for new steel and also for old & corroded steel in concrete repair & rehabilitation applications.TechnoCoat® ZR Special is compatible and can be over coated with a wide range of high performance corrosion resistant finish coatings based on epoxy, chlorinated rubber, polyurethanes etc.,

TechnoCoat® UCR is a two-component, High solids, heat and chemical resistant epoxy. This highly versatile epoxy coating comes in clear and pigmented. TechnoCoat® UCR consists of pre-weighed base & hardener components, both of them contain reactive elements that are essential to the installation of the system. TechnoCoat® UCR is suitable for use on concrete and steel surfaces. The material may be used with or without antislip aggregates and can also can be laminated with glass fibre cloth to achieve a high build, chemical resistant lining.

TechnoCoat® RR500 is a single component sulphate and chloride free liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat. TechnoCoat® RR500 performs rust removal and rust prevention in one operation in mild conditions.

TechnoCoat® RR100 is a single component sulphate and chloride free liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat. TechnoCoat® RR100 performs rust removal and rust prevention in one operation in mild conditions.

TechnoCoat® PU-TC is a two component, solvent free, thixotropic, pigmented aliphatic polyurethane based waterproofing membrane possessing good resistance to long term exposure of UV rays and chemical attack and provides an easily cleaned coating.TechnoCoat® PU-TC remains unaffected by rain water, soap water, dilute acids, alkalis and various other chemical solutions.

TechnoCoat® Novolac HS is a solvent free, durable, High performance, excellent wear and chemical resistance epoxy resin Novolac coating system designed for use as a chemical resistant Lining, Coating and hard wearing coloured flooring system for areas such as factories, warehouses, Chemicals unit etc.TechnoCoat® Novolac HS consists of preweighed base & hardener components and a TechnoFloor® colour pack, all of which contain reactive elements that are essential to the installation of the system. TechnoCoat® Novolac HS is suitable for use on concrete and steel surfaces. The material may be used with or without antislip aggregates and can also can be laminated with glass fibre cloth to achieve a high build, chemical resistant lining.

TechnoCoat® Fire Optima 180 is a single component indigenous coating for protection of substrates from Fire, flame and continuous torching. TechnoCoat® Fire Optima 180 does not ignite, does not catch fire and hence does not emit any toxic gases. There by reducing and restricting the substrates and base materials from fire there by eliminating and reducing damages and causalities.

TechnoSeal® UVR-TC is a two component, solvent free, thixotropic, pigmented aliphatic polyurethane based waterproofing membrane interior and exterior top coat for concrete and metal surfaces possessing good resistance to long term exposure of UV rays and chemical attack and provides an easily cleaned coating.TechnoSeal® UVR-TC remains unaffected by rain water, soap water, dilute acids, alkalis and various other chemical solutions.

TechnoCoat® CarboElastic1K (S) is a single component, solvent-based aliphatic acrylate coating for external and internal use over a variety of concrete and masonry substrates. It penetrates into the porous concrete substrate, producing an exterior masonry impermeable coating that also prevents chloride ion ingress and exceeds all the requirements of a coating that resists carbonation.

TechnoCoat® CarboElastic1K (M) is a single component, high build, decorative protective and Anticarbonation coating based on an advance acrylic micro polymer resin binder that cross-links to give excellent adhesion to most building substrates. The cured membrane is elastomeric, enabling it to facilitate movement in the substrate and to bridge hairline cracks, giving outstanding durability over a long service life. TechnoCoat® CarboElastic1K (M) coating is suitable for use on exterior and interior surfaces of concrete and anti-rust primed steel.

TechnoCoat® ZR Special is a formulated two component Zinc Rich Anticorrosive epoxy primer for ferrous metal surfaces to provide far better performance over other primers by cathodic protection to the base metal. TechnoCoat® ZR Special is recommended both for new steel and also for old & corroded steel in concrete repair & rehabilitation applications.TechnoCoat® ZR Special is compatible and can be over coated with a wide range of high performance corrosion resistant finish coatings based on epoxy, chlorinated rubber, polyurethanes etc.,

TechnoCoat® UCR is a two-component, High solids, heat and chemical resistant epoxy. This highly versatile epoxy coating comes in clear and pigmented. TechnoCoat® UCR consists of pre-weighed base & hardener components, both of them contain reactive elements that are essential to the installation of the system. TechnoCoat® UCR is suitable for use on concrete and steel surfaces. The material may be used with or without antislip aggregates and can also can be laminated with glass fibre cloth to achieve a high build, chemical resistant lining.

TechnoCoat® RR500 is a single component sulphate and chloride free liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat. TechnoCoat® RR500 performs rust removal and rust prevention in one operation in mild conditions.

TechnoCoat® RR100 is a single component sulphate and chloride free liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat. TechnoCoat® RR100 performs rust removal and rust prevention in one operation in mild conditions.

TechnoCoat® PU-TC is a two component, solvent free, thixotropic, pigmented aliphatic polyurethane based waterproofing membrane possessing good resistance to long term exposure of UV rays and chemical attack and provides an easily cleaned coating.TechnoCoat® PU-TC remains unaffected by rain water, soap water, dilute acids, alkalis and various other chemical solutions.

TechnoCoat® Novolac HS is a solvent free, durable, High performance, excellent wear and chemical resistance epoxy resin Novolac coating system designed for use as a chemical resistant Lining, Coating and hard wearing coloured flooring system for areas such as factories, warehouses, Chemicals unit etc.TechnoCoat® Novolac HS consists of preweighed base & hardener components and a TechnoFloor® colour pack, all of which contain reactive elements that are essential to the installation of the system. TechnoCoat® Novolac HS is suitable for use on concrete and steel surfaces. The material may be used with or without antislip aggregates and can also can be laminated with glass fibre cloth to achieve a high build, chemical resistant lining.

TechnoCoat® Fire Optima 180 is a single component indigenous coating for protection of substrates from Fire, flame and continuous torching. TechnoCoat® Fire Optima 180 does not ignite, does not catch fire and hence does not emit any toxic gases. There by reducing and restricting the substrates and base materials from fire there by eliminating and reducing damages and causalities.

TechnoSeal® UVR-TC is a two component, solvent free, thixotropic, pigmented aliphatic polyurethane based waterproofing membrane interior and exterior top coat for concrete and metal surfaces possessing good resistance to long term exposure of UV rays and chemical attack and provides an easily cleaned coating.TechnoSeal® UVR-TC remains unaffected by rain water, soap water, dilute acids, alkalis and various other chemical solutions.

TechnoCoat® CarboElastic1K (S) is a single component, solvent-based aliphatic acrylate coating for external and internal use over a variety of concrete and masonry substrates. It penetrates into the porous concrete substrate, producing an exterior masonry impermeable coating that also prevents chloride ion ingress and exceeds all the requirements of a coating that resists carbonation.

TechnoCoat® CarboElastic1K (M) is a single component, high build, decorative protective and Anticarbonation coating based on an advance acrylic micro polymer resin binder that cross-links to give excellent adhesion to most building substrates. The cured membrane is elastomeric, enabling it to facilitate movement in the substrate and to bridge hairline cracks, giving outstanding durability over a long service life. TechnoCoat® CarboElastic1K (M) coating is suitable for use on exterior and interior surfaces of concrete and anti-rust primed steel.

TechnoCoat® ZR Special is a formulated two component Zinc Rich Anticorrosive epoxy primer for ferrous metal surfaces to provide far better performance over other primers by cathodic protection to the base metal. TechnoCoat® ZR Special is recommended both for new steel and also for old & corroded steel in concrete repair & rehabilitation applications.TechnoCoat® ZR Special is compatible and can be over coated with a wide range of high performance corrosion resistant finish coatings based on epoxy, chlorinated rubber, polyurethanes etc.,

TechnoCoat® UCR is a two-component, High solids, heat and chemical resistant epoxy. This highly versatile epoxy coating comes in clear and pigmented. TechnoCoat® UCR consists of pre-weighed base & hardener components, both of them contain reactive elements that are essential to the installation of the system. TechnoCoat® UCR is suitable for use on concrete and steel surfaces. The material may be used with or without antislip aggregates and can also can be laminated with glass fibre cloth to achieve a high build, chemical resistant lining.

TechnoCoat® RR500 is a single component sulphate and chloride free liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat. TechnoCoat® RR500 performs rust removal and rust prevention in one operation in mild conditions.

TechnoCoat® RR100 is a single component sulphate and chloride free liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat. TechnoCoat® RR100 performs rust removal and rust prevention in one operation in mild conditions.

TechnoCoat® PU-TC is a two component, solvent free, thixotropic, pigmented aliphatic polyurethane based waterproofing membrane possessing good resistance to long term exposure of UV rays and chemical attack and provides an easily cleaned coating.TechnoCoat® PU-TC remains unaffected by rain water, soap water, dilute acids, alkalis and various other chemical solutions.

TechnoCoat® Novolac HS is a solvent free, durable, High performance, excellent wear and chemical resistance epoxy resin Novolac coating system designed for use as a chemical resistant Lining, Coating and hard wearing coloured flooring system for areas such as factories, warehouses, Chemicals unit etc.TechnoCoat® Novolac HS consists of preweighed base & hardener components and a TechnoFloor® colour pack, all of which contain reactive elements that are essential to the installation of the system. TechnoCoat® Novolac HS is suitable for use on concrete and steel surfaces. The material may be used with or without antislip aggregates and can also can be laminated with glass fibre cloth to achieve a high build, chemical resistant lining.

TechnoCoat® Fire Optima 180 is a single component indigenous coating for protection of substrates from Fire, flame and continuous torching. TechnoCoat® Fire Optima 180 does not ignite, does not catch fire and hence does not emit any toxic gases. There by reducing and restricting the substrates and base materials from fire there by eliminating and reducing damages and causalities.

TechnoSeal® UVR-TC is a two component, solvent free, thixotropic, pigmented aliphatic polyurethane based waterproofing membrane interior and exterior top coat for concrete and metal surfaces possessing good resistance to long term exposure of UV rays and chemical attack and provides an easily cleaned coating.TechnoSeal® UVR-TC remains unaffected by rain water, soap water, dilute acids, alkalis and various other chemical solutions.

TechnoCoat® CarboElastic1K (S) is a single component, solvent-based aliphatic acrylate coating for external and internal use over a variety of concrete and masonry substrates. It penetrates into the porous concrete substrate, producing an exterior masonry impermeable coating that also prevents chloride ion ingress and exceeds all the requirements of a coating that resists carbonation.

TechnoCoat® CarboElastic1K (M) is a single component, high build, decorative protective and Anticarbonation coating based on an advance acrylic micro polymer resin binder that cross-links to give excellent adhesion to most building substrates. The cured membrane is elastomeric, enabling it to facilitate movement in the substrate and to bridge hairline cracks, giving outstanding durability over a long service life. TechnoCoat® CarboElastic1K (M) coating is suitable for use on exterior and interior surfaces of concrete and anti-rust primed steel.

TechnoCoat® ZR Special is a formulated two component Zinc Rich Anticorrosive epoxy primer for ferrous metal surfaces to provide far better performance over other primers by cathodic protection to the base metal. TechnoCoat® ZR Special is recommended both for new steel and also for old & corroded steel in concrete repair & rehabilitation applications.TechnoCoat® ZR Special is compatible and can be over coated with a wide range of high performance corrosion resistant finish coatings based on epoxy, chlorinated rubber, polyurethanes etc.,

TechnoCoat® UCR is a two-component, High solids, heat and chemical resistant epoxy. This highly versatile epoxy coating comes in clear and pigmented. TechnoCoat® UCR consists of pre-weighed base & hardener components, both of them contain reactive elements that are essential to the installation of the system. TechnoCoat® UCR is suitable for use on concrete and steel surfaces. The material may be used with or without antislip aggregates and can also can be laminated with glass fibre cloth to achieve a high build, chemical resistant lining.

TechnoCoat® RR500 is a single component sulphate and chloride free liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat. TechnoCoat® RR500 performs rust removal and rust prevention in one operation in mild conditions.

TechnoCoat® RR100 is a single component sulphate and chloride free liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat. TechnoCoat® RR100 performs rust removal and rust prevention in one operation in mild conditions.

TechnoCoat® PU-TC is a two component, solvent free, thixotropic, pigmented aliphatic polyurethane based waterproofing membrane possessing good resistance to long term exposure of UV rays and chemical attack and provides an easily cleaned coating.TechnoCoat® PU-TC remains unaffected by rain water, soap water, dilute acids, alkalis and various other chemical solutions.

TechnoCoat® Novolac HS is a solvent free, durable, High performance, excellent wear and chemical resistance epoxy resin Novolac coating system designed for use as a chemical resistant Lining, Coating and hard wearing coloured flooring system for areas such as factories, warehouses, Chemicals unit etc.TechnoCoat® Novolac HS consists of preweighed base & hardener components and a TechnoFloor® colour pack, all of which contain reactive elements that are essential to the installation of the system. TechnoCoat® Novolac HS is suitable for use on concrete and steel surfaces. The material may be used with or without antislip aggregates and can also can be laminated with glass fibre cloth to achieve a high build, chemical resistant lining.

TechnoCoat® Fire Optima 180 is a single component indigenous coating for protection of substrates from Fire, flame and continuous torching. TechnoCoat® Fire Optima 180 does not ignite, does not catch fire and hence does not emit any toxic gases. There by reducing and restricting the substrates and base materials from fire there by eliminating and reducing damages and causalities.

TechnoSeal® UVR-TC is a two component, solvent free, thixotropic, pigmented aliphatic polyurethane based waterproofing membrane interior and exterior top coat for concrete and metal surfaces possessing good resistance to long term exposure of UV rays and chemical attack and provides an easily cleaned coating.TechnoSeal® UVR-TC remains unaffected by rain water, soap water, dilute acids, alkalis and various other chemical solutions.

TechnoCoat® CarboElastic1K (S) is a single component, solvent-based aliphatic acrylate coating for external and internal use over a variety of concrete and masonry substrates. It penetrates into the porous concrete substrate, producing an exterior masonry impermeable coating that also prevents chloride ion ingress and exceeds all the requirements of a coating that resists carbonation.

TechnoCoat® CarboElastic1K (M) is a single component, high build, decorative protective and Anticarbonation coating based on an advance acrylic micro polymer resin binder that cross-links to give excellent adhesion to most building substrates. The cured membrane is elastomeric, enabling it to facilitate movement in the substrate and to bridge hairline cracks, giving outstanding durability over a long service life. TechnoCoat® CarboElastic1K (M) coating is suitable for use on exterior and interior surfaces of concrete and anti-rust primed steel.

TechnoCoat® ZR Special is a formulated two component Zinc Rich Anticorrosive epoxy primer for ferrous metal surfaces to provide far better performance over other primers by cathodic protection to the base metal. TechnoCoat® ZR Special is recommended both for new steel and also for old & corroded steel in concrete repair & rehabilitation applications.TechnoCoat® ZR Special is compatible and can be over coated with a wide range of high performance corrosion resistant finish coatings based on epoxy, chlorinated rubber, polyurethanes etc.,

TechnoCoat® UCR is a two-component, High solids, heat and chemical resistant epoxy. This highly versatile epoxy coating comes in clear and pigmented. TechnoCoat® UCR consists of pre-weighed base & hardener components, both of them contain reactive elements that are essential to the installation of the system. TechnoCoat® UCR is suitable for use on concrete and steel surfaces. The material may be used with or without antislip aggregates and can also can be laminated with glass fibre cloth to achieve a high build, chemical resistant lining.

TechnoCoat® RR500 is a single component sulphate and chloride free liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat. TechnoCoat® RR500 performs rust removal and rust prevention in one operation in mild conditions.

TechnoCoat® RR100 is a single component sulphate and chloride free liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat. TechnoCoat® RR100 performs rust removal and rust prevention in one operation in mild conditions.

TechnoCoat® PU-TC is a two component, solvent free, thixotropic, pigmented aliphatic polyurethane based waterproofing membrane possessing good resistance to long term exposure of UV rays and chemical attack and provides an easily cleaned coating.TechnoCoat® PU-TC remains unaffected by rain water, soap water, dilute acids, alkalis and various other chemical solutions.

TechnoCoat® Novolac HS is a solvent free, durable, High performance, excellent wear and chemical resistance epoxy resin Novolac coating system designed for use as a chemical resistant Lining, Coating and hard wearing coloured flooring system for areas such as factories, warehouses, Chemicals unit etc.TechnoCoat® Novolac HS consists of preweighed base & hardener components and a TechnoFloor® colour pack, all of which contain reactive elements that are essential to the installation of the system. TechnoCoat® Novolac HS is suitable for use on concrete and steel surfaces. The material may be used with or without antislip aggregates and can also can be laminated with glass fibre cloth to achieve a high build, chemical resistant lining.

TechnoCoat® Fire Optima 180 is a single component indigenous coating for protection of substrates from Fire, flame and continuous torching. TechnoCoat® Fire Optima 180 does not ignite, does not catch fire and hence does not emit any toxic gases. There by reducing and restricting the substrates and base materials from fire there by eliminating and reducing damages and causalities.

TechnoSeal® UVR-TC is a two component, solvent free, thixotropic, pigmented aliphatic polyurethane based waterproofing membrane interior and exterior top coat for concrete and metal surfaces possessing good resistance to long term exposure of UV rays and chemical attack and provides an easily cleaned coating.TechnoSeal® UVR-TC remains unaffected by rain water, soap water, dilute acids, alkalis and various other chemical solutions.

TechnoCoat® CarboElastic1K (S) is a single component, solvent-based aliphatic acrylate coating for external and internal use over a variety of concrete and masonry substrates. It penetrates into the porous concrete substrate, producing an exterior masonry impermeable coating that also prevents chloride ion ingress and exceeds all the requirements of a coating that resists carbonation.

TechnoCoat® CarboElastic1K (M) is a single component, high build, decorative protective and Anticarbonation coating based on an advance acrylic micro polymer resin binder that cross-links to give excellent adhesion to most building substrates. The cured membrane is elastomeric, enabling it to facilitate movement in the substrate and to bridge hairline cracks, giving outstanding durability over a long service life. TechnoCoat® CarboElastic1K (M) coating is suitable for use on exterior and interior surfaces of concrete and anti-rust primed steel.

TechnoCoat® ZR Special is a formulated two component Zinc Rich Anticorrosive epoxy primer for ferrous metal surfaces to provide far better performance over other primers by cathodic protection to the base metal. TechnoCoat® ZR Special is recommended both for new steel and also for old & corroded steel in concrete repair & rehabilitation applications.TechnoCoat® ZR Special is compatible and can be over coated with a wide range of high performance corrosion resistant finish coatings based on epoxy, chlorinated rubber, polyurethanes etc.,

TechnoCoat® UCR is a two-component, High solids, heat and chemical resistant epoxy. This highly versatile epoxy coating comes in clear and pigmented. TechnoCoat® UCR consists of pre-weighed base & hardener components, both of them contain reactive elements that are essential to the installation of the system. TechnoCoat® UCR is suitable for use on concrete and steel surfaces. The material may be used with or without antislip aggregates and can also can be laminated with glass fibre cloth to achieve a high build, chemical resistant lining.

TechnoCoat® RR500 is a single component sulphate and chloride free liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat. TechnoCoat® RR500 performs rust removal and rust prevention in one operation in mild conditions.

TechnoCoat® RR100 is a single component sulphate and chloride free liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat. TechnoCoat® RR100 performs rust removal and rust prevention in one operation in mild conditions.

TechnoCoat® PU-TC is a two component, solvent free, thixotropic, pigmented aliphatic polyurethane based waterproofing membrane possessing good resistance to long term exposure of UV rays and chemical attack and provides an easily cleaned coating.TechnoCoat® PU-TC remains unaffected by rain water, soap water, dilute acids, alkalis and various other chemical solutions.

TechnoCoat® Novolac HS is a solvent free, durable, High performance, excellent wear and chemical resistance epoxy resin Novolac coating system designed for use as a chemical resistant Lining, Coating and hard wearing coloured flooring system for areas such as factories, warehouses, Chemicals unit etc.TechnoCoat® Novolac HS consists of preweighed base & hardener components and a TechnoFloor® colour pack, all of which contain reactive elements that are essential to the installation of the system. TechnoCoat® Novolac HS is suitable for use on concrete and steel surfaces. The material may be used with or without antislip aggregates and can also can be laminated with glass fibre cloth to achieve a high build, chemical resistant lining.

TechnoCoat® Fire Optima 180 is a single component indigenous coating for protection of substrates from Fire, flame and continuous torching. TechnoCoat® Fire Optima 180 does not ignite, does not catch fire and hence does not emit any toxic gases. There by reducing and restricting the substrates and base materials from fire there by eliminating and reducing damages and causalities.

Sterling Technotrade