TechnoFix®Epomast 341 is a two component, high strength solvent free thixotropic epoxy adhesive and patching compound which is specially formulated from high grade epoxy resin, non-sag properties are perfect for large overhead and vertical bonding and structural repairs. TechnoFix®Epomast 341 capable of application and cure in cold, damp or dry conditions. The product makes joints of high mechanical strength, which are resistant to most common chemicals as well as exhibiting very good abrasion along with negligible shrinkage.
TechnoFix®Epomast 300 is a multi-component, low odour, non-sag and chemically resistant solvent free epoxy resinous mortar specifically developed for use with maximum chemical and abrasion resistance for protection of concrete and other substrate in aggressive conditions like sewage tanks and manholes. When used in conjunction with either TechnoSeal® PrimePlus Primer the product provides excellent adhesion to concrete materials. TechnoFix®Epomast 300 consists of an unique blend of specially selected fillers and high purity resins that form an easily finished impervious thixotropic lining and benching mortar with high build characteristics for protection of concrete combined with optimum chemical and mechanical resistance.
TechnoFix®Epomast 200 is a three component, solvent-free, high strength epoxy resinous Mortar supplied in pre-weighed quantities ready for on-site mixing and use. It is specially designed for easy placing and compaction with negligible shrinkage designed principally for use in construction and renovation work.TechnoFix®Epomast 200 consists of a unique blend of specially selected fillers and high purity resins that form an easily finished impervious mortar with high build characteristics combined with optimum chemical and mechanical resistance.
TechnoFix® Epomast InjectoSeal LV A two-component, high build low viscosity epoxy resin grout for crack repairs down from 0.25-2mm wide by the injection process. During application of TechnoFix® Epomast InjectoSeal LV the moisture tolerant resin will structurally bond the fractured sections and seal fine cracks against ingress of water within structures.
TechnoFix® Epomast InjectoSeal 2K is a low viscosity epoxy resin based crack injection resin system long mixed pot life designed for sealing cracks in concrete and restoring its structural integrity. TechnoFix® Epomast InjectoSeal 2K is a two-component, 100% solids structural epoxy resin used for deep penetration into cracks, sealing and restoring the structural integrity of concrete. Due to its very low viscosity (compared to conventional Epoxy resins) TechnoFix® Epomast InjectoSeal 2K is used for pore and crack filling as well as for rigidifying purposes at concrete restoration even for hair line cracks it can be used.
TechnoFix®Epomast InjectoSeal 2K-M is a solvent-free, moisture insensitive, ultra-low viscosity, two component epoxy injection resin system designed specifically for use in crack grouting by pressure injection or gravity-feed and for making structural epoxy mortars and grouts in concrete and a variety of other substrates. TechnoFix® Epomast InjectoSeal 2K-M is moisture insensitive and can be applied in damp to dry (not wet) conditions.
TechnoFix® EP Grout LV is a low viscosity epoxy resin based crack injection resin system long mixed pot life designed for sealing cracks in concrete and restoring its structural integrity. TechnoFix® EP Grout LV is a two-component, 100% solids structural epoxy resin used for deep penetration into cracks, sealing and restoring the structural integrity of concrete. Due to its very low viscosity (compared to conventional Epoxy resins) TechnoFix® EP Grout LV is used for pore and crack filling as well as for rigidifying purposes at concrete restoration even for hair line cracks it can be used.
TechnoFix®Epomast PE is a versatile, rapid curing, high strength three-component, polyester resin based mortar suitable for many applications in building and civil engineering such as for the bedding and fixing of manhole frames, airport landing lights, duct frames and precast concrete units. It has been formulated for easy mixing and placement, even at low temperatures and, when cured, provides a durable, chemically resistant bedding and fixing material with good bond strength
TechnoFix®Epomast ETS is a three component, solvent-free, high build, lightweight epoxy mortar supplied in pre-weighed quantities ready for on-site mixing and use specially designed for construction and renovation work in vertical and overhead applications. TechnoFix®Epomast ETS consists of a unique blend of specially selected fillers and high purity resins that form an easily finished impervious mortar with high build characteristics combined with optimum chemical and mechanical resistance.
TechnoFix®Epomast 400 ETS is a three component epoxy-urethane resin system that hardens at ambient temperature whose basic binding agent is epoxy with special compatible liquid tar and elastomer additives combines with optimum mechanical properties, resistance to chemical aggression, dielectric properties and outstanding elasticity.TechnoFix®Epomast 400 ETS consists a unique blend of specially selected fillers and high purity resins, specially developed to provide an extended maintenance free life nosing which combines rapid curing properties with exceptional flexibility and resilience, capable of absorbing continual traffic impact, to meet the requirements for nosing transition strips in tropical climates.