TechnoSeal®Gelflex AY 200 is a versatile, environmentally compatible, 2-component Hydrophilic, cross-linked Vinyl Ester Methacrylate resin modified injection grout developed for injection into pores, cracks, capillaries, voids and honeycombed concrete via injection hoses and packers. TechnoSeal®Gelflex AY 200 consisting of 2 components: a resin and an initiator which are pumped with a twin piston pump at a 1:1 ratio. Once polymerised, TechnoSeal®Gelflex AY 200 forms a resilient, highly elastic gel which is capable of absorbing and desorbing water. Due to its exceptionally low viscosity and low surface tension, TechnoSeal®Gelflex AY 200 exhibits better penetration into cracks than water.
TechnoPur®InjectoSeal 2K is an ultra-rapid reacting, expansive hydrophobic polyurethane injection grout specially designed to stop active water leaks and fill voids in concrete, gravel layers and rock fissures. Having very high reactivity and excellent mechanical performance and chemical stability characteristics the product enable to cut off large water leaks. It cures to a rigid, durable, closed cell polyurethane foam resistant to most organic solvents, mild acids, alkali, petroleum and micro-organisms. The closed cell foam will maintain its physical form and is not subject to shrinkage due to wet/dry cycles.
TechnoPur®InjectoSeal 1K-M is a closed cell, high performance hydrophobic polyurethane injection grout designed to initiate expansion in the product to seal leaking cracks and joints in concrete structure and fill voids in generally inaccessible locations. TechnoPur®InjectoSeal 1K-M only reacts when it comes into contact with water, producing a non-toxic, semi-flexible polyurethane foam and quickly cures to a tough, flexible, closed-cell polyurethane foam that is generally unaffected by common corrosive environments and is not subject to shrinkage due to wet/dry cycles.
TechnoPur® Grout Gelflex 2K is a solvent and phthalate-free two-component MDI-based hydrophilic polyurethane injection system designed with a mixing ratio of 1:1 by volume with extended gel time forming an elastomeric gel. The special characteristics of “permanently elastic” of TechnoPur® Grout Gelflex 2K allow a permanent crack and joint sealing even in case of movement of the crack and The special characteristics of “extended gel time forming” of TechnoPur® Grout Gelflex 2K allow the reaction time between 20–25 minutes independent from the amount of water present in the structure.
TechnoPur® Gelflex LV 2 in 1 is a two-component, low viscous, dual combination solvent and phthalate-free, polyurethane injection resin grout system to stop water leakage along with permanent & elastic sealing of cracks in the concrete structure. TechnoPur® Grout Gelflex Plus special dual combination characteristics are designed to work in both wet and dry surfaces in concrete structures and work effectively as mentioned below:
TechnoFix® CarboRez PP Strip are pultruded carbon fibre reinforced polymer (CFRP) laminates, designed for strengthening concrete, timber, masonry, steel and fibre reinforced polymer structures. TechnoFix® CarboRez PP Strip /plates are used as externally bonded reinforcement using Sterling® TechnoWrap EP LV & TechnoSeal® EPA (HS) two-part, 100% solids, high strength structural adhesive system epoxy resin based adhesive providing additional strength and stiffness to concrete, masonry, and wood structural elements.TechnoFix® CarboRez PP Strip provide high tensile strength for flexural reinforcement (plate bonding) of concrete, metal, wood and other construction materials and repair is lightweight, non-corrosive and is much easier to install than steel.
TechnoFix® CarboRez CW Plus is a 0º unidirectional carbon fibre fabric constructed of very high strength and high elastic modulus carbon fibres used as a part of TechnoFix® CarboRez Composite Strengthening System. TechnoFix® CarboRez CW Plus is applied onto the surface of existing structural members in buildings, bridges, and other structures using specially developed resins ‘TechnoFix® Conwrap prime LV’ and TechnoSeal® family of high-performance polymers that enable site installation of the CFRP structural strengthening system.
TechnoFix® CarboRez CW Plus is a 0º unidirectional carbon fibre fabric constructed of very high strength and high elastic modulus carbon fibres used as a part of TechnoFix® CarboRez Composite Strengthening System. TechnoFix® CarboRez CW Plus is applied onto the surface of existing structural members in buildings, bridges, and other structures using specially developed resins ‘TechnoFix® Conwrap prime LV’ and TechnoSeal® family of high-performance polymers that enable site installation of the CFRP structural strengthening system.
TechnoCem™ MortarSeal Extra is a trowelable finish fast setting repair mortar with non-shrinkage effect and thixotropic high strength formulation for structure repair and also for brickwork. It is suitable for placing in thickness of 6mm to 30mm both vertically and overhead. It provides a durable, strong structure repair fully compatible with host concrete.
TechnoCem™ ConFlow® HES Grout is a high performance, pumpable, low bleed, cementitious grout that sets rapidly with high early strengths and durability is engineered for grouting for filling, anchorages and structural repair and other high flow grouting applications formulated from a blend of special cement, graded fillers and special chemical additives which imparts controlled expansion in the plastic state whilst minimising water demand to achieve high strengths in short time frame.